Current state (largely broken)¶
What is iptables and who needs it?¶
Properly configured, the iptables / netfilter package on the FritzBox router protects all devices behind from unwanted access. This filter is able to check, dump, forward, prioritize or manipulate network packages and implement a border line defense against DoS attacks, port scans and unwanted traffic. It can e.g. stop „home calling“ of installed software packages etc. This package leverages the FritzBox hardware to a feature-rich, powerful Firewall solution, comparable to expensive professional business grade devices.
The basic netfilter filter engine is built-in into the Linux kernel - this has implications to the different FritzBox types since the 72xx boxes all have a more recent kernel than the 71xx variants. So some features of iptables are only available in the newer 7270.
- the older boxes (71xx) have issues with the conntrack module (limited RAM and the old Linux kernel leads to Memory overflows of the tracking tables resulting in unexpected reboots of the box)
- There is no Web UI for iptables on the 7270 yet.
- 7270 has more RAM and a more recent kernel - conntrack works great (conntrack = connection tracking module, implements stateful firewall package rules, e.g. for ftp, VoIP, etc.)
- some syntax of iptables commands / abilities differ between 71xx and 7270 boxes.
- the command / abilities depend on loaded modules (iptables is a modular system!), some error messages result from missing / not yet loaded modules.
What is the difference between AVM Firewall and iptables, can they co-exist on the same system?¶
- The AVM Firewall is an integrated part of the dsld from AVM (dsl daemon). It „sits“ on the DSL interface and controls exclusively the traffic trough this interface. The abilities include connection tracking (stateful), port forwarding, traffic shaping and packet filtering. After passing the dsld module, the data packages arrive at the internal interface and are distributed to the box and their interfaces without further control. The default input / output rules are set to PERMIT, anything is allowed, what is not blocked by a specific rule. There are only few rules set to block some NetBIOS ports and a known virus port. Inbound traffic is protected by NAT (network address translation) only, only packages requested from inside (connection tracking) or set by port forwarding rules can be translated to the destination private (RFC) IP address range. However this is a week protection, many ports are open by default (VoIP, TR064 / TR069 …), the dsld is a piece of proprietary undocumented software of AVM, no source code is available, many multimedia ports are open, also remote management via tr069/tr064 is by default open to the ISPs, what is a potential vulnerability. Logging is not implemented.
- iptables based firewalls are deeply integrated into lowest layers of the Linux kernel. They control any network traffic from / to or through the box. They are the ultimate protection of the box from unwanted access both from outside and LAN traffic. Using iptables one can implement powerful DMZ security zones, protection against DoS attacks and port scans, and even a deep-inspection of data packages is possible. Beside this, one can define rules for virtual interfaces, control VPN tunnel traffic and create source / destination NAT rules for virtual hosts. Iptables / netfilter is a powerful, state-of-the-art Open Source firewall - and last but not least it can log the traffic by rules!
- Both firewall solutions act on completely different areas (AVM FW is completely encapsulated in the dsld module, iptables/netfilter is integrated in the OS kernel), so they and their rules are independent from each other, beside the fact, that the (external) traffic is serialized and must bypass both: that means a ALLOW rule of the one cannot bypass a DENY/REJECT rule of the other, both must be configured to allow the desired traffic. Here some pass-trough examples:
Traffic targeting the FritzBox:DSL < — > AVM Firewall (NAT) < — > iptables Firewall < — > (FritzBox) < — > iptables Firewall < — > LAN / WLANTraffic between the Internet and LAN interfaces:DSL < — > AVM Firewall (NAT) < — > iptables Firewall < — > LAN / WLAN
DMZ or VPN Tunnel traffic to LAN/WLAN :DMZ / Tunnel Interfaces < — > iptables Firewall < — > LAN / WLAN
- Because AVM FW controls the dsl modem, one cannot completely remove it without a replacement while operating the box as a DSL router.
- Both firewalls can operate side-by-side without any issues, one has to consider, that both need to be configured to allow desired traffic (serialization)
- Because they are „cascaded“, one can benefit from increased security: a hacker must bypass 2 independent firewall solutions to gain access to the box and devices behind.
- Even ISP operators are using the „backdoor“ configuration capabilities of tr064/tr069 protocol have no chance to access the router and devices behind protected by well-configured iptables rules.
- The best-practise configuration / strongest protection can be achieved by applying rigorous traffic rules on both firewalls and allowing only necessary traffic.
How to build iptables for Freetz?¶
- select iptables and all needed modules using make menuconfig while building the firmware (unstable branch)
- not listed modules (e.g. ULOG target) can be added after reconfiguring and replacing the kernel replace kernel / make kernelconfig (for experienced developers only!)
- the availability of the modules depends on the kernel version and configured kernel options.
Configuration: After successful firmware build and upload¶
- first of all: it is recommended to test the rules interactively using ssh or telnet.
- before one can start defining rules, the modules have to be loaded by modprobe into the RAM.
# the most common modules needed: modprobe ip_tables modprobe iptable_filter modprobe x_tables modprobe xt_tcpudp # Alternative LOG und REJECT targets: modprobe ipt_LOG modprobe ipt_REJECT # if one wants to use ip ranges in the rules: modprobe ipt_iprange # same for port ranges: modprobe xt_multiport # for stateful firewall rules (conntrack): modprobe xt_state modprobe xt_conntrack modprobe ip_conntrack modprobe ip_conntrack_ftp modprobe ip_conntrack_tftp
- After registering / loading the modules we can start defining rules (here some rules for a strong basic protection):
# # # FIREWALL RULES iptables -N TRANS # Outbound for surfing the Internet: # 20 FTP data, 21 FTP, 22 SSH, 25 SMTP, 80 HTTP, 110 POP3, 443 HTTPS, 465 SSMTP, 995 POP3S, 5060 VoIP # 53 DNS, 67/68 DHCP, 80 HTTP, 123 NTP, 5060 VoIP iptables -A TRANS -p tcp -s 192.168.0.0/24 -m multiport --dport 20,21,22,25,80,110,443,465,995,5060 -j ACCEPT iptables -A TRANS -p udp -s 192.168.0.0/24 -m multiport --dport 53,67,68,80,123,5060 -j ACCEPT iptables -A TRANS -p icmp -s 192.168.0.0/24 -j ACCEPT # conntrack rules for returning data packages: iptables -A TRANS -m state --state RELATED,ESTABLISHED -j ACCEPT # ... Some rules for known hosts # ... iptables -A TRANS -j LOG --log-prefix "[IPT] DENY-LAN-ACCESS " # log all dropped packets iptables -A TRANS -j DROP # PARANOIA LINK # # # Rules for Fritz Device iptables -A INPUT -p udp -s 0.0.0.0 -d 255.255.255.255 --sport 68 --dport 67 -j ACCEPT #DHCP iptables -A INPUT -s 127.0.0.1 -d 127.0.0.1 -j ACCEPT # LOCALHOST iptables -A INPUT -s 192.168.0.0/24 -j ACCEPT # LAN iptables -A INPUT -s 169.254.0.0/16 -i lan -j ACCEPT # EMERGENCY LAN iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp --dport 5060 -j ACCEPT # VoIP iptables -A INPUT -p udp --dport 5060 -j ACCEPT # VoIP iptables -A INPUT -j LOG --log-prefix "[IPT] DENY-FRITZ-ACCESS " # Log other traffic iptables -A INPUT -j DROP # PARANOIA IN iptables -P INPUT DROP # Default policy DROP iptables -A OUTPUT -d 192.168.0.0/24 -j ACCEPT # Allow LAN iptables -A OUTPUT -d 18.104.22.168/24 -j ACCEPT # UPnP iptables -A OUTPUT -d 22.214.171.124 -j ACCEPT iptables -A OUTPUT -d 127.0.0.1 -j ACCEPT # Local Host iptables -A OUTPUT -p udp -m multiport --dport 53,123,5060 -j ACCEPT # DNS, TIME, VoIP iptables -A OUTPUT -p tcp --dport 5060 -j ACCEPT # VoIP iptables -A OUTPUT -p tcp --dport 80 -d 126.96.36.199/24 -j ACCEPT # DynDNS iptables -A OUTPUT -d myMailServer.com -j ACCEPT # e-Mail OUT iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # stateful conntrack iptables -A OUTPUT -d 188.8.131.52 -p tcp --dport 80 -j ACCEPT # Plugins Server AVM # iptables -A OUTPUT -d www.dasoertliche.de -p tcp --dport 80 -j ACCEPT # Phone book reverse look-up targets # iptables -A OUTPUT -d www.dastelefonbuch.de -p tcp --dport 80 -j ACCEPT # iptables -A OUTPUT -d www.goyellow.de -p tcp --dport 80 -j ACCEPT # iptables -A OUTPUT -d www.11880.com -p tcp --dport 80 -j ACCEPT # iptables -A OUTPUT -d www.google.de -p tcp --dport 80 -j ACCEPT # iptables -A OUTPUT -d www.das-telefonbuch.at -p tcp --dport 80 -j ACCEPT # iptables -A OUTPUT -d www.search.ch -p tcp --dport 80 -j ACCEPT # iptables -A OUTPUT -d www.anywho.com -p tcp --dport 80 -j ACCEPT iptables -A OUTPUT -j LOG --log-prefix "[IPT] WARNING-CALL-HOME " # Log forbidden outbound traffic iptables -P OUTPUT DROP # and DROP it. # # # Rules for FORWARD iptables -P FORWARD DROP iptables -A FORWARD -j TRANS # LAN - WAN traffic rules iptables -A FORWARD -j LOG --log-prefix "[IPT] DENY-FWD-ACCESS "
- compared to the AVM firewall, iptables rules apply immediately, without the need of a restart.
- after testing, iptables rules can be persisted in the following script: /var/flash/debug.cfg, so they survive a box reboot.
- first load all needed modules with modprobe
- than define iptables rules in the right order (top down processing)
- Packages passing LOG targets are shown on console 0.
Hints regarding FritzBox 7270:¶
AVM has customized the printk module while implementing DECT base station functions, that is responsible for the handling of the kernel log messages, and they do not hit the syslog any longer. With this command one can temporary turn off the AVM printk (what leads to unavailability of DECT) to get a real syslog / klog of system messages.
echo STD_PRINTK > /dev/debug
To revert the settings to AVM printk and re-enable DECT type:
echo AVM_PRINTK > /dev/debug
The log appears then again on console 0 and is no longer in the syslog.
You can also try a patch from this ticket, but first read the comments carefully.
What is the difference of INPUT, OUTPUT and FORWARD chains¶
- the INPUT chain filters inbound traffic to the box / localhost itself, this rules expose services of the FritzBox to the „rest of the world“.
- the OUTPUT chain filters outbound traffic initiated by the box, this are rules for services the box needs from outside (e.g. DNS, NTP,etc.)
- the FORWARD chain filters traffic trough the box from one interface to another (e.g. Internet < — > LAN/WLAN ) (pass-trough services)
- the conntrack rules target the returning data packets, they must be defined in the complementary path (for INPUT rules in the OUTPUT path etc.)
Hints regarding the example code¶
- the first rule of the INPUT chain should be an ACCEPT rule for the admin interface to prevent a lock-out from the box (don’t forget the according conntrack rule in the OUTPUT chain!).
- set the default policy for all chains to DENY after everything is tested and works (last rule!)
- in the example there was a new chain TRANS defined to show the capabilities of this great piece of software.
- in the example there are no rules for VoIP traffic, one can easily add them when needed
- there are no NAT rules, because NAT is already done by dsld, we use both firewalls here
- we use only some of the available modules, please feel free to load others using modprobe when needed for special rules
- this example is quite restrictive regarding the traffic of the box to the Internet, anything not explicitly allowed is forbidden.
- it gives you only a glimpse of the opportunities iptables offers, for more information search online for the wiki of iptables / netfilter in your preferred language.
Isolate guest network from LAN¶
These rules will prevent access to the local area network, including the box itself from the guest network:
iptables -A INPUT -d 192.168.178.0/24 -i guest -j DROP iptables -A FORWARD -i guest -o dsl -j ACCEPT iptables -A FORWARD -i guest -j DROP iptables -A OUTPUT -s 192.168.178.0/24 -o guest -j DROP
The guest network can only use the internet. Assuming the default subnet (192.168.178.0/24).
- Should UDP 80 not be blocked?
- Should 184.108.40.206/24 and 220.127.116.11 not be blocked on the WAN side?